Material Handling Equipment


SR. NO. Equipment Description
1 Overhead Cranes & Vehicles :

• 5 Tonne E.O.T. crane - 1 no.
• 2 Tonne Hydraulic pallet truck - 2 nos.
• 2 Tonne Mobile crane - 1 no. 		Single load lifting capability (max) – 15 tonnes,
Lifting height - meters, Span - 17 metres.
2 Machine Shop: Lathe Machines - 4 nos.

• Radial Drill Machine (32 mm) – 1 no.
• Hand Drilling Machines
• Hand Grinders
3 Varnishing and Automatic Temperature
Control Atmospheric Drying Ovens :

• Heating Ovens - 2 nos.
4 Welding and Gas Cutting :

• Dc Electric Welding Machine
• Ac Electric Welding Machine
• Mig Welding Machine
• Oxy Acitiline Gas Plants
5 Assembly Line Equipment

• Stator Housing Hydrolic Press – 2 nos.
6 Presses, Pulleys & Others

• Hydraulic Press (50 Tonne)
• Hydraulic Puller (50 Tonne)
• Hydraulic Puller (10 Tonne)
• 5.5 Kw Elgi Compressor
• 2 Dynamic Balancing : 200 KG, 500 KG


Coil Shop Equipment


SR. NO. Equipment Description
1 Coil Looping Machine
 Loops with a maximum pin-to-pin length of 2 metres & of various
shapes – hairpin, trapezoidal, etc. are available
2 Round Wire Coil Winding Machine

 Coil length 1.5 mtr, Coil spread 0.5 mtrs
3 Hot Press Coil Moulding Machine : 4 Nos.
 Maximum Moulding Length – 1.0 mtrs
Maximum Coil Section – 40mm x 16mm



Electric Measuring Instruments


  • Digital Multi meter (AC/DC)
  • Digital Clamp meter (400A,600V AC/DC)
  • Agronomic Prestige Micro ohm meter (10 milli ohms to 10 k ohms)
  • H.V.Tester (AEI make – 0-5kV)
  • Megger (0-2000 M ohms)
  • Polarity tester (Geonix)
  • Manual controlled voltage (AEI make - 0-500 Volts)
  • Contact Temperature Meter .



Mechanical Measuring Instruments


  • Mitutoyo Micrometers (0-25,50-75,50-150,150-300,300-400)
  • Internal micrometer (50-500)
  • Vernier calipers (0-150 (digital), 0-300,0-600)
  • Heigth gauge (0-300)
  • Bore dial gauge (50-150)
  • All ring gauges, snap gauges, key way
    gauges & Granite surface plate (1000 x 1000 mm)
  • Vibration meter (IRD 306 D Mechanalysis).



Electrical Testing Equipment


SR. NO. Equipment Description
1 High voltage testing transformer
 0 to 30 kV r.m.s., 100 mA
output current capacity
2 Electronic insulation resistance meter (ELTEL make)
Measuring upto 106 Megohm.
(100 - 500 - 1000 - 2500 -5000 Volts)
3 3 phase 415V variable voltage transformer

 0 - 440 V, 100 A output current
4 Variable DC current source
0 - 440 Volts, 120 Amps
0 – 300 Volts, 30 Amps
5 Inter-turn Surge Comparison Tester
 Maximum Voltage : 10 kV. Rise Time:
0.5 micro seconds
6 Tachometer
 System & Controls make